LEXMARK COLOR JETPRINTER SERIES 7000 DRIVER

Disconnect the printhead cable from the encoder card. To enter the test: Remove the three screws securing the system board to the carrier frame and remove the system board. Gently pry the Code Module from the system board noting the position of the notch in the module. When reinstalling the caps, be sure the cap is positioned with the locking tabs to the left and right before pushing them down on their mounting posts. Parts peculiar to one or the other of the assemblies are listed separately and identified by description. Repair Information Note:

Uploader: Malazilkree
Date Added: 17 June 2009
File Size: 56.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 33515
Price: Free* [*Free Regsitration Required]

Printer Output Max Speed. If voltage is not present, check the printhead cable for opens to the encoder card.

FRU Action 1 Jetpringer Station Assembly As the carrier moves to the right over the maintenance station, a slot on the bottom of the carrier engages a tab on the sled of the maintenance station causing the caps to rise and seal the printheads. El rise de xoc electric i de danys personals pot augmentar durant el proces de desmuntatge i de servei d’aquest producte.

A broken line indicates one or more print nozzles are not working. The printer also logs the last occurring error. Remove the pick roll hub, shaft and envelope bucklers. Attach the wrap plug to the parallel port. Manual Insert Tray Removal 1.

  CONEXANT PCI CX11252 MODEM DRIVER

Note the relationship of the parts. To reassemble, place the cover over the tabs in the jetorinter cover and press down until the cover latches. Bose, Sony, Sennheiser and Jaybird Here’s a selection of the best headphone shopping values this holiday season. coloe

Turn power off or unplug the printer to stop the test. Lexmark ne peut etre tenu responsable de I’utilisation d’autres pieces de rechange. The paper feed gears turn. You may need to remove the cable from the carrier to inspect it.

Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. If you are removing a pluggable module, use the correct tool.

Preventive Maintenance 7. Diagnostic Aids Encoder Sensor Test This test disables tine printer motors to let you manually move the carrier to verify the encoder is working correctly.

Lexmark 7000 Color Jetprinter – printer – color – ink-jet

Researchers find way to track ‘untraceable’ 3D-printed guns The 3D-printer leaves a hardware fingerprint. Disconnect the transport motor connector from the system board. Lexmark no es responsabilitza de I’us d’altres peces de recanvi.

  GV AV64S DRIVER DOWNLOAD

Be respectful, keep it civil and stay on topic. Best Cyber Monday deals at Staples: Lubrication Specifications Lubricate only colir parts are replaced or as needed, not on a scheduled basis. Note the routing of the motor cable.

Full text of “Lexmark Color JetPrinter , , v Service Manual”

If the printhead cable is good, replace the system board. Slide the cover over the matching pieces on the bottom cover. Remove the video cover and the board. As fungoes de seguranga de alguns dos componentes podem nao ser sempre obvias.

Make Your Selection

To stop the test, turn power off or unplug the printer. Be sure the envelope guides are against the envelopes. Be sure to unplug the 77000 before you reconnect the power supply to the system board. If your printer has an error indication, locate the series of flashes in the “Error Indicator Table” on page and take the indicated action.